Tôi vừa kiểm tra mảng RAID của mình sáng nay và những gì tôi nhận được là:
$ cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md1 : active raid1 sdc7[0]
238340224 blocks [2/1] [U_]
md0 : active raid1 sdc6[0]
244139648 blocks [2/1] [U_]
md127 : active raid1 sdc3[0]
390628416 blocks [2/1] [U_]
unused devices: <none>
$
Điều đó, tôi tin rằng, có nghĩa là một đĩa trong (các) mảng của tôi đã chết, điều này có đúng không?
Làm thế nào để tôi xử lý sự cố thích hợp trong tương lai? Hình của tôi /etc/mdadm/mdadm.confnhư:
$ cat /etc/mdadm/mdadm.conf
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#
# by default (built-in), scan all partitions (/proc/partitions) and all
# containers for MD superblocks. alternatively, specify devices to scan, using
# wildcards if desired.
#DEVICE partitions containers
# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes
# automatically tag new arrays as belonging to the local system
HOMEHOST <system>
# instruct the monitoring daemon where to send mail alerts
MAILADDR root
# definitions of existing MD arrays
ARRAY /dev/md127 UUID=124cd4a5:2965955f:cd707cc0:bc3f8165
ARRAY /dev/md0 UUID=91e560f1:4e51d8eb:cd707cc0:bc3f8165
ARRAY /dev/md1 UUID=0abe503f:401d8d09:cd707cc0:bc3f8165
Làm thế nào để tôi tìm ra ổ đĩa vật lý nào bị hỏng và cần phải thay thế?
Cảm ơn
EDIT1
# mdadm --detail /dev/md0
/dev/md0:
Version : 0.90
Creation Time : Tue Sep 1 19:15:33 2009
Raid Level : raid1
Array Size : 244139648 (232.83 GiB 250.00 GB)
Used Dev Size : 244139648 (232.83 GiB 250.00 GB)
Raid Devices : 2
Total Devices : 1
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Mon Sep 21 07:11:24 2015
State : clean, degraded
Active Devices : 1
Working Devices : 1
Failed Devices : 0
Spare Devices : 0
UUID : 91e560f1:4e51d8eb:cd707cc0:bc3f8165
Events : 0.76017
Number Major Minor RaidDevice State
0 8 38 0 active sync /dev/sdc6
1 0 0 1 removed
root@regDesktopHome:~#
Tại sao nó lại nói Failed Devices : 0?
EDIT2
Mở Gparted, tôi có thể xem cả hai, /dev/sdbvà /dev/sdcđó là hai RAIDổ đĩa của tôi . Tuy nhiên, mdadm nghĩ rằng /dev.sdbđã bị xóa vì một số lý do ... đó là kỳ lạ. Tôi đã cố gắn kết một phân vùng trên `` / dev / sdb` và nhận được những điều sau đây
$sudo mount /dev/sdb7 test
[sudo] password for ron:
mount: unknown filesystem type 'linux_raid_member'
Mà nhìn tất cả hợp tác. Làm cách nào để lấy lại mảng RAID của tôi theo thứ tự?
EDIT 3
Tôi chạy smartctl -a /dev/sdcvà smartctl -a /dev/sdb, tôi cũng đã làm badblocks /dev/sdcvà badblocks /dev/sdbvà trong khi sdcdường như 100% sạch sẽ, sdbtrở lại một số khối xấu:
# badblocks /dev/sdb
16130668
16130669
16130670
16130671
Điều đó có khả năng là nguyên nhân gây ra lỗi mà tôi đang gặp không? Bất kỳ cách nào để sửa chữa / bỏ qua các khối xấu này hoặc tôi nên thay thế ổ đĩa thay thế?
CHỈNH SỬA 4
# smartctl --all /dev/sdb
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-62-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST31000528AS
Serial Number: 6VP0308B
LU WWN Device Id: 5 000c50 013d3ae45
Firmware Version: CC34
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Sep 26 11:35:02 2015 PDT
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213891en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 195) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 78420742
3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1240
5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 60
7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 199357441
9 Power_On_Hours 0x0032 052 052 000 Old_age Always - 42401
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 037 020 Old_age Always - 1240
183 Runtime_Bad_Block 0x0000 098 098 000 Old_age Offline - 2
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 094 094 000 Old_age Always - 6
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 050 050 000 Old_age Always - 50
190 Airflow_Temperature_Cel 0x0022 062 046 045 Old_age Always - 38 (Min/Max 30/38)
194 Temperature_Celsius 0x0022 038 054 000 Old_age Always - 38 (0 17 0 0 0)
195 Hardware_ECC_Recovered 0x001a 030 012 000 Old_age Always - 78420742
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 73332271657814
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2822963046
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2361465529
SMART Error Log Version: 1
ATA Error Count: 6 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 6 occurred at disk power-on lifetime: 42372 hours (1765 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 d9 44 ec 01 Error: UNC at LBA = 0x01ec44d9 = 32261337
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 d8 44 ec 41 00 09:26:28.967 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 09:26:28.941 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 09:26:28.940 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 09:26:28.928 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 09:26:28.901 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 5 occurred at disk power-on lifetime: 42372 hours (1765 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 d9 44 ec 01 Error: UNC at LBA = 0x01ec44d9 = 32261337
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 d8 44 ec 41 00 09:26:26.095 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 09:26:26.069 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 09:26:26.068 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 09:26:26.055 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 09:26:26.029 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 4 occurred at disk power-on lifetime: 42372 hours (1765 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 d9 44 ec 01 Error: UNC at LBA = 0x01ec44d9 = 32261337
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 d8 44 ec 41 00 09:26:23.222 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 09:26:23.195 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 09:26:23.194 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 09:26:23.182 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 09:26:23.137 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 3 occurred at disk power-on lifetime: 42372 hours (1765 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 d9 44 ec 01 Error: UNC at LBA = 0x01ec44d9 = 32261337
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 d8 44 ec 41 00 09:26:20.351 READ FPDMA QUEUED
60 00 80 e8 44 ec 41 00 09:26:20.350 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 09:26:20.324 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 09:26:20.323 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 09:26:20.311 SET FEATURES [Set transfer mode]
Error 2 occurred at disk power-on lifetime: 42372 hours (1765 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 d9 44 ec 01 Error: UNC at LBA = 0x01ec44d9 = 32261337
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 e8 44 ec 41 00 09:26:17.478 READ FPDMA QUEUED
60 00 40 a8 44 ec 41 00 09:26:17.478 READ FPDMA QUEUED
60 00 20 88 44 ec 41 00 09:26:17.476 READ FPDMA QUEUED
60 00 08 80 44 ec 41 00 09:26:17.453 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 09:26:17.427 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
#
CHỈNH SỬA 5
Tôi nhận ra rằng sau khi rút phích cắm /dev/sdb, trước đây /dev/sdclà bây giờ /dev/sdb. Tôi xác nhận smartctl -a /dev/sdbrằng số sê-ri đã thay đổi sau khi khởi động với ổ đĩa xấu được rút ra. Tôi không may mắn và ổ đĩa đã hết bảo hành , vì vậy tôi sẽ có cho mình một ổ đĩa thay thế mới.
FYI: Bạn nên xem [UU] cho một tấm gương khỏe mạnh, không phải [U_]. Như bạn nghĩ, nó có nghĩa là một trong những tấm gương của bạn bị mất. @ Đề nghị của Halfgaar là tốt nhất.
—
Tim S.
Chỉnh sửa lại 6, bạn đã thực hiện
—
MadHatter
mdadm --manage ... --add ...Halfgaar mà đề xuất chưa?
Một trong những điều quan trọng về các trang web Stack Exchange là chúng không phải là diễn đàn và không có chủ đề. Bạn hỏi một câu hỏi, nó đã được trả lời. Nếu bạn có nhiều câu hỏi (liên quan) hơn, bạn nên hỏi chúng dưới dạng câu hỏi mới và nếu có thể tham khảo bản gốc. Trước khi bạn làm điều đó mặc dù bạn có thể muốn tìm kiếm trang web.
—
dùng9517