C #
(thông qua LINQPad, trong chế độ "Chương trình C #";)
Sẽ phải áp dụng Kiểm soát đột quỵ công bằng, theo bất kỳ cách chơi gôn nào, nhưng đây là cách tiếp cận của tôi trong C # (tốt, LINQPad, nhưng ai muốn tất cả các chương trình soạn thảo để làm cho ứng dụng C # đầy đủ hoạt động?) .
Các định nghĩa lưới là khác nhau, với một số ống thẳng đứng và chiều cao của cấu trúc tổng thể, và được lặp lại ngẫu nhiên bằng cách chuyển một hạt giống (xem hàm PipeGridtạo).
Trong trường hợp không có câu trả lời dứt khoát về cách đối tượng sẽ di chuyển theo hướng nào nếu có thể, tôi đã cho phép bạn chỉ định một hành vi từ một số tùy chọn (xem SolveBehaviorbảng liệt kê / hàm PipeSolvertạo).
Bắt đầu theo chiều dọc là có thể xác định (xem PipeSolver.Solve).
Tôi đã giả định rằng các ống ngang luôn nằm giữa hai ống thẳng đứng liền kề , tức là không có ống ngang nào có thể bỏ qua ống ngang.
///<summary>Entry point</summary>
void Main()
{
var grid = new PipeGrid(vertical:10, height:10, seed:5);
var solver = new PipeSolver(grid, SolveBehavior.FlipFlop);
solver.Solve(start:2);
}
///<summary>Represents the direction the object is travelling</summary>
enum Direction
{
Down = 0,
Left = 1,
Right = 2
}
///<summary>Determines the route to take if a junction yields both horizontal directions</summary>
enum SolveBehavior
{
///<summary>Throws an <see cref="InvalidOperationException" /></summary>
Fail = 0,
///<summary>Prefers the left-most direction (screen-relative)</summary>
FavorLeft = 1,
///<summary>Prefers the right-most direction (screen-relative)</summary>
FavorRight = 2,
///<summary>Alternates preferred direction, based on the number of turns</summary>
FlipFlop = 3,
///<summary>Prefers the same direction the object travelled, on its last horizontal movement</summary>
SameDirection = 4,
///<summary>Prefers the opposite direction the object travelled, on its last horizontal movement</summary>
Uturn = 5
}
///<summary>Provides the logic for solving a <see cref="PipeGrid" /></summmary>
class PipeSolver
{
///<summary>Creates a new <see cref="PipeSolver" /> for the supplied <paramref name="grid" />,
///with the given <paramref name="behavior" /> used to resolve junctions with both horizontal
///paths</summary>
public PipeSolver(PipeGrid grid, SolveBehavior behavior = SolveBehavior.FlipFlop)
{
if (grid == null) throw new ArgumentNullException("grid");
_grid = grid;
_behavior = behavior;
}
private readonly PipeGrid _grid;
private readonly SolveBehavior _behavior;
///<summary>Simulate the dropping of an object to run through the grid, at the top of a
///given <paramref name="start" /> vertical pipe</summary>
public void Solve(int start = 1, bool dumpFrames = false, string tag = "Result")
{
if (start < 1) start = 1;
if (start > _grid.Verticals) start = _grid.Verticals;
int x, y;
Direction?[,] path = new Direction?[_grid.Width, _grid.Height];
x = (start - 1) * 2;
y = 0;
Direction dir = Direction.Down, lastDir = Direction.Down;
int turns = 0;
do
{
path[x, y] = dir; // we moved through this pipe
// rule 1: when moving through horizontal pipe, object will go down when possible
if ((dir == Direction.Left || dir == Direction.Right) && (x % 2 == 0))
{
lastDir = dir;
dir = Direction.Down;
++turns;
}
// rule 2: when moving through start pipe, object will turn into horizontal pipe when possible
else if (dir == Direction.Down)
{
bool hasLeft = (x > 0 && _grid[x - 1, y]);
bool hasRight = (x < _grid.Width - 1 && _grid[x + 1, y]);
if (hasLeft && hasRight)
{
switch (_behavior)
{
case SolveBehavior.FavorLeft:
hasRight = false; // "forget" about right pipe
break;
case SolveBehavior.FavorRight:
hasLeft = false; // "forget" about left pipe
break;
case SolveBehavior.FlipFlop:
if (turns % 2 == 0) hasLeft = false;
else hasRight = false; // "forget" about left on the even moves, or right on the odd moves
break;
case SolveBehavior.SameDirection: // force staying in the same direction
if (lastDir == Direction.Left) hasRight = false;
else if (lastDir == Direction.Right) hasLeft = false;
else goto case SolveBehavior.FlipFlop; // use the flip-flop behaviour to determine first turn
break;
case SolveBehavior.Uturn: // force turning back on itself
if (lastDir == Direction.Left) hasLeft = false;
else if (lastDir == Direction.Right) hasRight = false;
else goto case SolveBehavior.FlipFlop; // use the flip-flop behaviour to determine first turn
break;
default: throw new InvalidOperationException(
"Failed to find distinct path, with no resolving behavior defined"
);
}
}
if (hasLeft) dir = Direction.Left;
else if (hasRight) dir = Direction.Right;
if (hasLeft || hasRight) ++turns;
}
switch (dir) // update position, based on current direction
{
case Direction.Left: if (x > 0) --x; break;
case Direction.Right: if (x < _grid.Width - 1) ++x; break;
default: ++y; break;
}
if (dumpFrames)
{
DumpFrame(path, start, tag:string.Concat("Frame #", turns, " (", _grid.Seed, ")"));
DrawFrame(path, start, tag:string.Concat("Frame #", turns));
}
}
while (y < _grid.Height);
int end = (x / 2) + 1;
DumpFrame(path, start, end, turns, tag);
DrawFrame(path, start, end, turns, tag);
}
///<summary>Internal method for drawing a given frame</summary>
private void DumpFrame(Direction?[,] path, int start, int? end = null, int? turns = null, string tag = null)
{
var builder = new StringBuilder();
builder.Append(' ', --start * 5).AppendLine("v");
for (int y = 0; y < _grid.Height; y++)
{
for (int x = 0; x < _grid.Width; x++)
{
builder.Append(
(x % 2 == 0)
? path[x, y].HasValue ? ":" : _grid[x, y] ? "|" : " "
: path[x, y].HasValue ? "====" : _grid[x, y] ? "----" : " "
);
}
builder.AppendLine();
}
if (end.HasValue) builder.Append(' ', (end.Value - 1) * 5).AppendLine("^");
if (turns.HasValue) builder.Append(turns.Value)
.Append(" turns were taken to get to ")
.AppendLine(end.HasValue ? "the end." : "this point.");
builder.ToString().Dump(string.IsNullOrWhiteSpace(tag) ? "Frame" : tag);
}
///<summary>Internal method for rendering a frame as a bitmap</summary>
private void DrawFrame(Direction?[,] path, int start, int? end = null, int? turns = null, string tag = null)
{
using (var sprites = new Sprites())
using (var canvas = new Bitmap(16 * _grid.Width, 16 * (_grid.Height + 3)))
using (var graphics = Graphics.FromImage(canvas))
{
graphics.FillRectangle(Brushes.Green, 0, 16, 16 * _grid.Width, 16 * _grid.Height);
_grid.Draw(graphics, sprites, offsetX:0, offsetY:16);
// draw the start position
start = (start - 1) * 32;
graphics.DrawImageUnscaled(sprites.RoadVertical, start, 0);
graphics.DrawImageUnscaled(sprites.CarVertical, start, 0);
graphics.DrawImageUnscaled(sprites.StartFlag, start, 0);
// draw the path
for (int y = 0; y < _grid.Height; y++)
for (int x = 0; x < _grid.Width; x++)
{
if (path[x, y].HasValue)
{
Image car;
switch (path[x, y])
{
case Direction.Left:
// if even, then on a vertical, so turning left; otherwise travelling left
car = (x % 2 == 0) ? sprites.CarTurnLeft : sprites.CarLeft;
break;
case Direction.Right:
// if even, then on a vertical, so turning right; otherwise travelling right
car = (x % 2 == 0) ? sprites.CarTurnRight: sprites.CarRight;
break;
default:
car = sprites.CarVertical;
if (x == 0 && path[x + 1, y].HasValue) // far-left and will move right = turn-right
car = sprites.CarTurnRight;
else if (x == _grid.Width - 1 && path[x - 1, y].HasValue) // far-right and will move left = turn-left
car = sprites.CarTurnLeft;
else if (x > 0 && x < _grid.Width - 1)
{
car = sprites.CarVertical; // if not right or left, then down
if (path[x + 1, y].HasValue && !path[x - 1, y].HasValue) // if came from the left, then turn right
car = sprites.CarTurnRight;
else if (path[x - 1, y].HasValue && !path[x + 1, y].HasValue) // if came from the right, then turn left
car = sprites.CarTurnLeft;
}
break;
}
graphics.DrawImageUnscaled(car, 16 * x, 16 * (y + 1));
}
}
// draw the end position, if we are at the end
if (end.HasValue)
{
end = (end - 1) * 32;
graphics.DrawImageUnscaled(sprites.RoadVertical, end.Value, 16 * (_grid.Height + 1));
graphics.DrawImageUnscaled(sprites.CarVertical, end.Value, 16 * (_grid.Height + 1));
graphics.DrawImageUnscaled(sprites.EndFlag, end.Value, 16 * (_grid.Height + 1));
}
if (turns.HasValue)
{
string s = string.Concat(turns.Value, " turns were taken to get to ",
end.HasValue ? "the end." : "this point.");
graphics.TextRenderingHint = System.Drawing.Text.TextRenderingHint.AntiAliasGridFit;
graphics.DrawString(s, SystemFonts.DefaultFont, Brushes.Black, 0, 16 * (_grid.Height + 2));
}
canvas.Dump(tag ?? "Bonus");
}
}
}
///<summary>Represents a configuration of pipes</summary>
class PipeGrid
{
///<summary>Creates a new <see cref="PipeGrid" />, of a given <paramref name="height" />
///with the given number of <paramref name="vertical" /> pipes, and randomly distributes
///horizontal pipes between them, based on a repeatable <paramref name="seed" />.</summary>
public PipeGrid(int vertical = 4, int height = 8, int? seed = null)
{
if (vertical < 2) vertical = 2;
if (height < 2) height = 2;
Width = (2 * vertical) - 1;
Height = height;
Verticals = vertical;
Seed = seed ?? Environment.TickCount;
var rnd = new Random(Seed);
_nodes = new bool[Width,Height];
for (int x = 0, xw = Width; x < xw; x++)
for (int y = 0; y < height; y++)
{
// place verticals in every even column, and randomly place horizontals in odd columns
if (x % 2 == 0 || rnd.Next(0, 2) == 1)
_nodes[x, y] = true;
}
}
private readonly bool[,] _nodes;
public int Width { get; private set; }
public int Height { get; private set; }
public int Verticals { get; private set; }
public int Seed { get; private set; }
public bool this[int x, int y] { get { return _nodes[x, y]; } }
///<summary>Renders the grid to the LINQPad results pane, for inspection</summary>
public PipeGrid Dump(string tag = null)
{
var builder = new StringBuilder();
for (int y = 0; y < Height; y++)
{
for (int x = 0; x < Width; x++)
{
builder.Append(
(x % 2 == 0)
? _nodes[x, y] ? "|" : " "
: _nodes[x, y] ? "----" : " "
);
}
builder.AppendLine();
}
builder.ToString().Dump(string.IsNullOrWhiteSpace(tag) ? "Grid" : tag);
return this;
}
///<summary>Render the grid as a bitmap image</summary>
public void Draw(Graphics g, Sprites s, int offsetX = 0, int offsetY = 0)
{
for (int y = 0; y < Height; y++)
{
for (int x = 0; x < Width; x++)
{
if (_nodes[x, y])
{
Image sprite = sprite = s.RoadVertical;
if (x % 2 != 0)
sprite = s.RoadHorizontal;
else if (x == 0 && _nodes[1, y])
sprite = s.JunctionTeeRight;
else if (x == Width - 1 && _nodes[x - 1, y])
sprite = s.JunctionTeeLeft;
else if (x > 0 && x < Width - 1)
{
if (_nodes[x - 1, y] && _nodes[x + 1, y])
sprite = s.JunctionCross;
else if (_nodes[x + 1, y] && !_nodes[x - 1, y])
sprite = s.JunctionTeeRight;
else if (_nodes[x - 1, y] && !_nodes[x + 1, y])
sprite = s.JunctionTeeLeft;
}
g.DrawImageUnscaled(sprite,
x:(16 * x) + offsetX,
y:(16 * y) + offsetY);
}
}
}
}
///<summary>Creates a <see cref="PipeGrid" /> with horizontal pipes at all possible positions</summary>
public static PipeGrid CreateAllOpen(int verticals = 4, int height = 8)
{
var grid = new PipeGrid(verticals, height, 0);
for (int y = 0; y < height; y++)
for (int x = 0, xw = grid.Width; x < xw; x++)
grid._nodes[x, y] = true;
return grid;
}
}
///<summary>Store tile sprites, to be used in the graphical rendering of the result</summary>
class Sprites : IDisposable
{
public Sprites()
{
byte[,] car = new byte[,] {
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 3, 3, 3, 3, 3, 3, 3, 3, 0, 0, 0, 0 },
{ 0, 0, 0, 1, 3, 3, 3, 3, 3, 3, 3, 3, 1, 0, 0, 0 },
{ 0, 0, 0, 1, 3, 1, 1, 1, 1, 1, 1, 3, 1, 0, 0, 0 },
{ 0, 0, 0, 1, 3, 1, 1, 1, 1, 1, 1, 3, 1, 0, 0, 0 },
{ 0, 0, 0, 0, 3, 3, 3, 3, 3, 3, 3, 3, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 3, 3, 3, 3, 3, 3, 3, 3, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 3, 3, 3, 3, 3, 3, 3, 3, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 3, 1, 1, 1, 1, 1, 1, 3, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 3, 1, 1, 1, 1, 1, 1, 3, 0, 0, 0, 0 },
{ 0, 0, 0, 1, 3, 1, 1, 1, 1, 1, 1, 3, 1, 0, 0, 0 },
{ 0, 0, 0, 1, 3, 3, 3, 3, 3, 3, 3, 3, 1, 0, 0, 0 },
{ 0, 0, 0, 1, 3, 3, 3, 3, 3, 3, 3, 3, 1, 0, 0, 0 },
{ 0, 0, 0, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 0, 0, 0 },
{ 0, 0, 0, 0, 3, 3, 3, 3, 3, 3, 3, 3, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
};
byte[,] road = new byte[,] {
{ 0, 6, 2, 2, 2, 2, 2, 6, 6, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 6, 6, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 6, 6, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 6, 6, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 6, 6, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 6, 6, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 6, 6, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 6, 6, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 6, 6, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 6, 6, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 6, 6, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 6, 6, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 6, 0 },
};
byte[,] roadNESW = new byte[,] {
{ 0, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 6, 0 },
{ 6, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 6, 6 },
{ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
{ 2, 2, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 2 },
{ 2, 2, 2, 2, 5, 5, 2, 5, 5, 2, 5, 5, 2, 2, 2, 2 },
{ 2, 2, 2, 2, 5, 5, 2, 5, 5, 2, 5, 5, 2, 2, 2, 2 },
{ 2, 2, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 2 },
{ 2, 2, 2, 2, 5, 5, 2, 5, 5, 2, 5, 5, 2, 2, 2, 2 },
{ 2, 2, 2, 2, 5, 5, 2, 5, 5, 2, 5, 5, 2, 2, 2, 2 },
{ 2, 2, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 2 },
{ 2, 2, 2, 2, 5, 5, 2, 5, 5, 2, 5, 5, 2, 2, 2, 2 },
{ 2, 2, 2, 2, 5, 5, 2, 5, 5, 2, 5, 5, 2, 2, 2, 2 },
{ 2, 2, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 2 },
{ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
{ 6, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 6, 6 },
{ 0, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 6, 0 },
};
byte[,] roadNES = new byte[,] {
{ 0, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 6, 0 },
{ 0, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 6, 6 },
{ 0, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
{ 0, 6, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 2 },
{ 0, 6, 2, 2, 5, 5, 2, 5, 5, 2, 5, 5, 2, 2, 2, 2 },
{ 0, 6, 2, 2, 5, 5, 2, 5, 5, 2, 5, 5, 2, 2, 2, 2 },
{ 0, 6, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 2 },
{ 0, 6, 2, 2, 5, 5, 2, 5, 5, 2, 5, 5, 2, 2, 2, 2 },
{ 0, 6, 2, 2, 5, 5, 2, 5, 5, 2, 5, 5, 2, 2, 2, 2 },
{ 0, 6, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 2 },
{ 0, 6, 2, 2, 5, 5, 2, 5, 5, 2, 5, 5, 2, 2, 2, 2 },
{ 0, 6, 2, 2, 5, 5, 2, 5, 5, 2, 5, 5, 2, 2, 2, 2 },
{ 0, 6, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 5, 2, 2, 2 },
{ 0, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
{ 0, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 6, 6 },
{ 0, 6, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 6, 0 },
};
byte[,] start = new byte[,] {
{ 0, 0, 1, 1, 1, 0, 4, 4, 4, 0, 0, 0, 4, 0, 0, 0 },
{ 0, 0, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0 },
{ 0, 0, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0 },
{ 0, 0, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0 },
{ 0, 0, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0 },
{ 0, 0, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0 },
{ 0, 0, 1, 4, 4, 4, 0, 0, 0, 4, 4, 4, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
};
byte[,] end = new byte[,] {
{ 0, 0, 1, 1, 1, 0, 1, 1, 6, 0, 0, 0, 6, 0, 0, 0 },
{ 0, 0, 1, 6, 6, 6, 1, 1, 6, 6, 1, 1, 6, 0, 0, 0 },
{ 0, 0, 1, 1, 6, 6, 6, 6, 1, 6, 1, 1, 1, 0, 0, 0 },
{ 0, 0, 1, 1, 1, 1, 6, 6, 1, 1, 6, 6, 1, 0, 0, 0 },
{ 0, 0, 1, 1, 1, 1, 1, 1, 6, 1, 6, 6, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 6, 6, 1, 1, 6, 6, 1, 1, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 6, 6, 6, 6, 1, 6, 1, 1, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 1, 1, 6, 6, 1, 1, 6, 6, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 1, 1, 0, 0, 0, 1, 6, 6, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
};
RoadVertical = Sprite(road);
RoadHorizontal = RotateSprite(RoadVertical, 90);
JunctionCross = Sprite(roadNESW);
JunctionTeeRight = Sprite(roadNES);
JunctionTeeLeft = FlipSprite(JunctionTeeRight, horizontal:true);
CarVertical = Sprite(car);
CarLeft = RotateSprite(CarVertical, 90);
CarRight = FlipSprite(CarLeft, horizontal:true);
CarTurnLeft = RotateSprite(CarVertical, 45);
CarTurnRight = FlipSprite(CarTurnLeft, horizontal:true);
StartFlag = Sprite(start);
EndFlag = Sprite(end);
}
public Image RoadVertical { get; private set; }
public Image RoadHorizontal { get; private set; }
public Image JunctionCross { get; private set; }
public Image JunctionTeeLeft { get; private set; }
public Image JunctionTeeRight { get; private set; }
public Image CarVertical { get; private set; }
public Image CarLeft { get; private set; }
public Image CarRight { get; private set; }
public Image CarTurnLeft { get; private set; }
public Image CarTurnRight { get; private set; }
public Image StartFlag { get; private set; }
public Image EndFlag { get; private set; }
///<summary>Create a sprite from the byte data</summary>
private Image Sprite(byte[,] data)
{
int width = data.GetLength(0);
int height = data.GetLength(1);
var image = new Bitmap(width, height);
for (int y = 0; y < height; y++)
for (int x = 0; x < width; x++)
{
Color c;
switch (data[y,x])
{
case 1: c = Color.Black; break;
case 2: c = Color.DarkGray; break;
case 3: c = Color.Red; break;
case 4: c = Color.LimeGreen; break;
case 5: c = Color.Yellow; break;
case 6: c = Color.White; break;
default: continue;
}
image.SetPixel(x, y, c);
}
return image;
}
///<summary>Rotate an image by a number of <paramref name="degrees" /> around the centre</summary>
private Image RotateSprite(Image source, float deg)
{
var b = new Bitmap(source.Width, source.Height);
using (var g = Graphics.FromImage(b))
{
float tx = (float)source.Width / 2.0f;
float ty = (float)source.Height / 2.0f;
g.TranslateTransform(tx, ty);
g.RotateTransform(deg);
g.TranslateTransform(-tx, -ty);
g.DrawImageUnscaled(source, 0, 0);
}
return b;
}
///<summary>Flip an image about its centre</summary>
private Image FlipSprite(Image source, bool horizontal = false, bool vertical = false)
{
var b = new Bitmap(source);
RotateFlipType rft = ( horizontal && vertical) ? RotateFlipType.RotateNoneFlipXY
: ( horizontal && !vertical) ? RotateFlipType.RotateNoneFlipX
: (!horizontal && vertical) ? RotateFlipType.RotateNoneFlipY
: RotateFlipType.RotateNoneFlipNone;
b.RotateFlip(rft);
return b;
}
#region IDisposable implementation
public void Dispose() { Dispose(true); }
~Sprites() { Dispose(false); }
protected void Dispose(bool disposing)
{
if (disposing)
{
GC.SuppressFinalize(this);
using (RoadVertical) { }
using (RoadHorizontal) { }
using (JunctionCross) { }
using (JunctionTeeLeft) { }
using (JunctionTeeRight) { }
using (CarVertical) { }
using (CarLeft) { }
using (CarRight) { }
using (CarTurnLeft) { }
using (CarTurnRight) { }
using (StartFlag) { }
using (EndFlag) { };
}
RoadVertical = null;
RoadHorizontal = null;
JunctionCross = null;
JunctionTeeLeft = null;
JunctionTeeRight = null;
CarVertical = null;
CarLeft = null;
CarRight = null;
CarTurnLeft = null;
CarTurnRight = null;
StartFlag = null;
EndFlag = null;
}
#endregion
}
Cập nhật:
Lo sợ đầu ra văn bản cũ đơn giản của tôi có thể hơi buồn tẻ cho bối cảnh phổ biến này, tôi cung cấp một phiên bản mở rộng cũng vẽ đường dẫn được chụp dưới dạng hình ảnh. Tôi đã mô hình nó như một chiếc xe hơi, lái xe qua một mạng lưới đường khủng khiếp, cố gắng đi đến tận cùng, nhưng với GPS tồi tệ nhất thế giới buộc bạn phải rẽ ở mọi ngã ba.
Như một phần thưởng, điều này cũng làm cho nó rõ ràng hơn để xem "lượt".
Thưởng thức - vroom vroom !!
Kết quả ví dụ:
(dọc: 10, chiều cao: 10, hạt ngẫu nhiên: 5, ống bắt đầu: 2, giải quyết hành vi: FlipFlop})
