Hình ảnh dưới đây cho thấy một vấn đề sao chép giao dịch mà tôi hiện đang điều tra.
Hình ảnh đến từ màn hình nhân rộng.
Làm cách nào tôi có thể nhận thông tin này bằng T-SQL?
Hình ảnh dưới đây cho thấy một vấn đề sao chép giao dịch mà tôi hiện đang điều tra.
Hình ảnh đến từ màn hình nhân rộng.
Làm cách nào tôi có thể nhận thông tin này bằng T-SQL?
Câu trả lời:
Sau khi thực hiện một số tìm kiếm trực tuyến, tôi tìm thấy những gì bạn cần, hy vọng câu trả lời của tôi sẽ giúp bạn.
trả lời 1
Ghi chú:
Nó chỉ hoạt động với sao chép giao dịch và giao dịch ngang hàng
Những điều cần được xem xét trước khi thực hiện kịch bản dưới đây
Yêu cầu sự cho phép trên các bảng sau bên trong cơ sở dữ liệu phân phối và chính
USE [distribution]
IF OBJECT_ID('Tempdb.dbo.#ReplStats') IS NOT NULL
DROP TABLE #ReplStats
CREATE TABLE [dbo].[#ReplStats](
[DistributionAgentName] [nvarchar](100) NOT NULL,
[DistributionAgentStartTime] [datetime] NOT NULL,
[DistributionAgentRunningDurationInSeconds] [int] NOT NULL,
[IsAgentRunning] [bit] NULL,
[ReplicationStatus] [varchar](14) NULL,
[LastSynchronized] [datetime] NOT NULL,
[Comments] [nvarchar](max) NOT NULL,
[Publisher] [sysname] NOT NULL,
[PublicationName] [sysname] NOT NULL,
[PublisherDB] [sysname] NOT NULL,
[Subscriber] [nvarchar](128) NULL,
[SubscriberDB] [sysname] NULL,
[SubscriptionType] [varchar](64) NULL,
[DistributionDB] [sysname] NULL,
[Article] [sysname] NOT NULL,
[UndelivCmdsInDistDB] [int] NULL,
[DelivCmdsInDistDB] [int] NULL,
[CurrentSessionDeliveryRate] [float] NOT NULL,
[CurrentSessionDeliveryLatency] [int] NOT NULL,
[TotalTransactionsDeliveredInCurrentSession] [int] NOT NULL,
[TotalCommandsDeliveredInCurrentSession] [int] NOT NULL,
[AverageCommandsDeliveredInCurrentSession] [int] NOT NULL,
[DeliveryRate] [float] NOT NULL,
[DeliveryLatency] [int] NOT NULL,
[TotalCommandsDeliveredSinceSubscriptionSetup] [int] NOT NULL,
[SequenceNumber] [varbinary](16) NULL,
[LastDistributerSync] [datetime] NULL,
[Retention] [int] NULL,
[WorstLatency] [int] NULL,
[BestLatency] [int] NULL,
[AverageLatency] [int] NULL,
[CurrentLatency] [int] NULL
) ON [PRIMARY]
INSERT INTO #ReplStats
SELECT da.[name] AS [DistributionAgentName]
,dh.[start_time] AS [DistributionAgentStartTime]
,dh.[duration] AS [DistributionAgentRunningDurationInSeconds]
,md.[isagentrunningnow] AS [IsAgentRunning]
,CASE md.[status]
WHEN 1 THEN '1 - Started'
WHEN 2 THEN '2 - Succeeded'
WHEN 3 THEN '3 - InProgress'
WHEN 4 THEN '4 - Idle'
WHEN 5 THEN '5 - Retrying'
WHEN 6 THEN '6 - Failed'
END AS [ReplicationStatus]
,dh.[time] AS [LastSynchronized]
,dh.[comments] AS [Comments]
,md.[publisher] AS [Publisher]
,da.[publication] AS [PublicationName]
,da.[publisher_db] AS [PublisherDB]
,CASE
WHEN da.[anonymous_subid] IS NOT NULL
THEN UPPER(da.[subscriber_name])
ELSE UPPER (s.[name]) END AS [Subscriber]
,da.[subscriber_db] AS [SubscriberDB]
,CASE da.[subscription_type]
WHEN '0' THEN 'Push'
WHEN '1' THEN 'Pull'
WHEN '2' THEN 'Anonymous'
ELSE CAST(da.[subscription_type] AS [varchar](64)) END AS [SubscriptionType]
,md.[distdb] AS [DistributionDB]
,ma.[article] AS [Article]
,ds.[UndelivCmdsInDistDB]
,ds.[DelivCmdsInDistDB]
,dh.[current_delivery_rate] AS [CurrentSessionDeliveryRate]
,dh.[current_delivery_latency] AS [CurrentSessionDeliveryLatency]
,dh.[delivered_transactions] AS [TotalTransactionsDeliveredInCurrentSession]
,dh.[delivered_commands] AS [TotalCommandsDeliveredInCurrentSession]
,dh.[average_commands] AS [AverageCommandsDeliveredInCurrentSession]
,dh.[delivery_rate] AS [DeliveryRate]
,dh.[delivery_latency] AS [DeliveryLatency]
,dh.[total_delivered_commands] AS [TotalCommandsDeliveredSinceSubscriptionSetup]
,dh.[xact_seqno] AS [SequenceNumber]
,md.[last_distsync] AS [LastDistributerSync]
,md.[retention] AS [Retention]
,md.[worst_latency] AS [WorstLatency]
,md.[best_latency] AS [BestLatency]
,md.[avg_latency] AS [AverageLatency]
,md.[cur_latency] AS [CurrentLatency]
FROM [distribution]..[MSdistribution_status] ds
INNER JOIN [distribution]..[MSdistribution_agents] da
ON da.[id] = ds.[agent_id]
INNER JOIN [distribution]..[MSArticles] ma
ON ma.publisher_id = da.publisher_id
AND ma.[article_id] = ds.[article_id]
INNER JOIN [distribution]..[MSreplication_monitordata] md
ON [md].[job_id] = da.[job_id]
INNER JOIN [distribution]..[MSdistribution_history] dh
ON [dh].[agent_id] = md.[agent_id]
AND md.[agent_type] = 3
INNER JOIN [master].[sys].[servers] s
ON s.[server_id] = da.[subscriber_id]
--Created WHEN your publication has the immediate_sync property set to true. This property dictates
--whether snapshot is available all the time for new subscriptions to be initialized.
--This affects the cleanup behavior of transactional replication. If this property is set to true,
--the transactions will be retained for max retention period instead of it getting cleaned up
--as soon as all the subscriptions got the change.
WHERE da.[subscriber_db] <> 'virtual'
AND da.[anonymous_subid] IS NULL
AND dh.[start_time] = (SELECT TOP 1 start_time
FROM [distribution]..[MSdistribution_history] a
JOIN [distribution]..[MSdistribution_agents] b
ON a.[agent_id] = b.[id] AND b.[subscriber_db] <> 'virtual'
WHERE [runstatus] <> 1
ORDER BY [start_time] DESC)
AND dh.[runstatus] <> 1
SELECT 'Transactional Replication Summary' AS [Comments];
SELECT [DistributionAgentName]
,[DistributionAgentStartTime]
,[DistributionAgentRunningDurationInSeconds]
,[IsAgentRunning]
,[ReplicationStatus]
,[LastSynchronized]
,[Comments]
,[Publisher]
,[PublicationName]
,[PublisherDB]
,[Subscriber]
,[SubscriberDB]
,[SubscriptionType]
,[DistributionDB]
,SUM([UndelivCmdsInDistDB]) AS [UndelivCmdsInDistDB]
,SUM([DelivCmdsInDistDB]) AS [DelivCmdsInDistDB]
,[CurrentSessionDeliveryRate]
,[CurrentSessionDeliveryLatency]
,[TotalTransactionsDeliveredInCurrentSession]
,[TotalCommandsDeliveredInCurrentSession]
,[AverageCommandsDeliveredInCurrentSession]
,[DeliveryRate]
,[DeliveryLatency]
,[TotalCommandsDeliveredSinceSubscriptionSetup]
,[SequenceNumber]
,[LastDistributerSync]
,[Retention]
,[WorstLatency]
,[BestLatency]
,[AverageLatency]
,[CurrentLatency]
FROM #ReplStats
GROUP BY [DistributionAgentName]
,[DistributionAgentStartTime]
,[DistributionAgentRunningDurationInSeconds]
,[IsAgentRunning]
,[ReplicationStatus]
,[LastSynchronized]
,[Comments]
,[Publisher]
,[PublicationName]
,[PublisherDB]
,[Subscriber]
,[SubscriberDB]
,[SubscriptionType]
,[DistributionDB]
,[CurrentSessionDeliveryRate]
,[CurrentSessionDeliveryLatency]
,[TotalTransactionsDeliveredInCurrentSession]
,[TotalCommandsDeliveredInCurrentSession]
,[AverageCommandsDeliveredInCurrentSession]
,[DeliveryRate]
,[DeliveryLatency]
,[TotalCommandsDeliveredSinceSubscriptionSetup]
,[SequenceNumber]
,[LastDistributerSync]
,[Retention]
,[WorstLatency]
,[BestLatency]
,[AverageLatency]
,[CurrentLatency]
SELECT 'Transactional Replication Summary Details' AS [Comments];
SELECT [Publisher]
,[PublicationName]
,[PublisherDB]
,[Article]
,[Subscriber]
,[SubscriberDB]
,[SubscriptionType]
,[DistributionDB]
,SUM([UndelivCmdsInDistDB]) AS [UndelivCmdsInDistDB]
,SUM([DelivCmdsInDistDB]) AS [DelivCmdsInDistDB]
FROM #ReplStats
GROUP BY [Publisher]
,[PublicationName]
,[PublisherDB]
,[Article]
,[Subscriber]
,[SubscriberDB]
,[SubscriptionType]
,[DistributionDB]Trả lời 2
Script_2 được tìm thấy trên MSDN
--First you find the distributor servername using the below running in publisher
Use master
EXEC sp_helpdistributor;
--Then you can run the below to find the type (use distributor database)
SELECT
(CASE
WHEN mdh.runstatus = '1' THEN 'Start - '+cast(mdh.runstatus as varchar)
WHEN mdh.runstatus = '2' THEN 'Succeed - '+cast(mdh.runstatus as varchar)
WHEN mdh.runstatus = '3' THEN 'InProgress - '+cast(mdh.runstatus as varchar)
WHEN mdh.runstatus = '4' THEN 'Idle - '+cast(mdh.runstatus as varchar)
WHEN mdh.runstatus = '5' THEN 'Retry - '+cast(mdh.runstatus as varchar)
WHEN mdh.runstatus = '6' THEN 'Fail - '+cast(mdh.runstatus as varchar)
ELSE CAST(mdh.runstatus AS VARCHAR)
END) [Run Status],
mda.subscriber_db [Subscriber DB],
mda.publication [PUB Name],
CONVERT(VARCHAR(25),mdh.[time]) [LastSynchronized],
und.UndelivCmdsInDistDB [UndistCom],
mdh.comments [Comments],
'select * from distribution.dbo.msrepl_errors (nolock) where id = ' + CAST(mdh.error_id AS VARCHAR(8)) [Query More Info],
mdh.xact_seqno [SEQ_NO],
(CASE
WHEN mda.subscription_type = '0' THEN 'Push'
WHEN mda.subscription_type = '1' THEN 'Pull'
WHEN mda.subscription_type = '2' THEN 'Anonymous'
ELSE CAST(mda.subscription_type AS VARCHAR)
END) [SUB Type],
mda.publisher_db+' - '+CAST(mda.publisher_database_id as varchar) [Publisher DB],
mda.name [Pub - DB - Publication - SUB - AgentID]
FROM distribution.dbo.MSdistribution_agents mda
LEFT JOIN distribution.dbo.MSdistribution_history mdh ON mdh.agent_id = mda.id
JOIN
(SELECT s.agent_id, MaxAgentValue.[time], SUM(CASE WHEN xact_seqno > MaxAgentValue.maxseq THEN 1 ELSE 0 END) AS UndelivCmdsInDistDB
FROM distribution.dbo.MSrepl_commands t (NOLOCK)
JOIN distribution.dbo.MSsubscriptions AS s (NOLOCK) ON (t.article_id = s.article_id AND t.publisher_database_id=s.publisher_database_id )
JOIN
(SELECT hist.agent_id, MAX(hist.[time]) AS [time], h.maxseq
FROM distribution.dbo.MSdistribution_history hist (NOLOCK)
JOIN (SELECT agent_id,ISNULL(MAX(xact_seqno),0x0) AS maxseq
FROM distribution.dbo.MSdistribution_history (NOLOCK)
GROUP BY agent_id) AS h
ON (hist.agent_id=h.agent_id AND h.maxseq=hist.xact_seqno)
GROUP BY hist.agent_id, h.maxseq
) AS MaxAgentValue
ON MaxAgentValue.agent_id = s.agent_id
GROUP BY s.agent_id, MaxAgentValue.[time]
) und
ON mda.id = und.agent_id AND und.[time] = mdh.[time]
where mda.subscriber_db<>'virtual' -- created when your publication has the immediate_sync property set to true. This property dictates whether snapshot is available all the time for new subscriptions to be initialized. This affects the cleanup behavior of transactional replication. If this property is set to true, the transactions will be retained for max retention period instead of it getting cleaned up as soon as all the subscriptions got the change.
--and mdh.runstatus='6' --Fail
--and mdh.runstatus<>'2' --Succeed
order by mdh.[time]Trả lời 3
Script đặc trưng trên SimpleTalk TSQL như một công việc đại lý.
Tạo trong cơ sở dữ liệu DBA được cài đặt trên máy chủ thuê bao. Mã để tạo bảng là:
CREATE TABLE dbo.Replication_Qu_History(
Subscriber_db varchar(50) NOT NULL,
Records_In_Que numeric(18, 0) NULL,
CatchUpTime numeric(18, 0) NULL,
LogDate datetime NOT NULL,
CONSTRAINT PK_EPR_Replication_Que_History PRIMARY KEY CLUSTERED
(
Subscriber_db ASC, LogDate DESC
) ON PRIMARY
GOKịch bản 1
Dữ liệu trong bảng này được điền bởi các quy trình giám sát và cung cấp bối cảnh lịch sử để kiểm tra các vấn đề. Nhưng để theo dõi những gì đang xảy ra ngay bây giờ nhiều hơn là cần thiết.
Có ba điều giúp xác định sức khỏe của sự nhân rộng.
Số lượng lệnh chưa xử lý đang chờ xử lý cho thuê bao
DECLARE @cmd NVARCHAR(max)
DECLARE @publisher SYSNAME, @publisher_db SYSNAME, @publication SYSNAME, @pubtype INT
DECLARE @subscriber SYSNAME, @subscriber_db SYSNAME, @subtype INT
DECLARE @cmdcount INT, @processtime INT
DECLARE @ParmDefinition NVARCHAR(500)
DECLARE @JobName SYSNAME
DECLARE @minutes INT, @threshold INT, @maxCommands INT, @mail CHAR(1) = 'N'
SET @minutes = 60 --> Define how many minutes latency before you would like to be notified
SET @maxCommands = 80000 ---> change this to represent the max number of outstanding commands to be proceduresed before notification
SET @threshold = @minutes * 60
SELECT * INTO #PublisherInfo
FROM OPENROWSET('SQLOLEDB', 'SERVER=(LOCAL);TRUSTED_CONNECTION=YES;'
, 'SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelppublisher')
SELECT @publisher = publisher FROM #PublisherInfo
SET @cmd = 'SELECT * INTO ##PublicationInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelppublication @publisher='
+ @publisher + ''')'
--select @cmd
EXEC sp_executesql @cmd
SELECT @publisher_db=publisher_db, @publication=publication, @pubtype=publication_type FROM ##PublicationInfo
SET @cmd = 'SELECT * INTO ##SubscriptionInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelpsubscription @publisher='
+ @publisher + ',@publication_type=' + CONVERT(CHAR(1),@pubtype) + ''')'
--select @cmd
EXEC sp_executesql @cmd
ALTER TABLE ##SubscriptionInfo
ADD PendingCmdCount INT NULL,
EstimatedProcessTime INT NULLĐể kiểm tra trạng thái của các công việc phân phối
DECLARE cur_sub CURSOR READ_ONLY FOR
SELECT @publisher, s.publisher_db, s.publication, s.subscriber, s.subscriber_db, s.subtype, s.distribution_agentname
FROM ##SubscriptionInfo s
OPEN cur_sub
FETCH NEXT FROM cur_sub INTO @publisher, @publisher_db, @publication, @subscriber, @subscriber_db, @subtype, @JobName
WHILE @@FETCH_STATUS = 0
BEGIN
SET @cmd = 'SELECT @cmdcount=pendingcmdcount, @processtime=estimatedprocesstime FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorsubscriptionpendingcmds @publisher=' + @publisher
+ ',@publisher_db=' + @publisher_db + ',@publication=' + @publication
+ ',@subscriber=' + @subscriber + ',@subscriber_db=' + @subscriber_db
+ ',@subscription_type=' + CONVERT(CHAR(1),@subtype) + ';' + ''')'
SET @ParmDefinition = N'@cmdcount INT OUTPUT,
@processtime INT OUTPUT'
--select @cmd
EXEC sp_executesql @cmd,@ParmDefinition,@cmdcount OUTPUT, @processtime OUTPUT
UPDATE ##SubscriptionInfo
SET PendingCmdCount = @cmdcount
, EstimatedProcessTime = @processtime
WHERE subscriber_db = @subscriber_db
INSERT INTO DBA.dbo.Replication_Que_History
VALUES(@subscriber_db, @cmdcount, @processtime, GETDATE())
-- find out if the distribution job with the high number of outstanding commands running or not
-- if it is running then sometimes stopping and starting the agent fixes the issue
IF EXISTS(SELECT * FROM tempdb.INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME LIKE '##JobInfo%')
DROP TABLE ##JobInfo
SET @cmd = 'SELECT * INTO ##JobInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC msdb.dbo.sp_help_job @job_name='''''
+ @JobName + ''''',@job_aspect=''''JOB'''''')'
EXEC sp_executesql @cmd
IF @cmdcount > @maxCommands OR (@processtime > @threshold AND @cmdcount > 0)
BEGIN
IF (SELECT current_execution_status FROM ##JobInfo) = 1 -- This means job is currently executing so stop/start it
BEGIN
EXEC distribution.dbo.sp_MSstopdistribution_agent
@publisher = @publisher
, @publisher_db = @publisher_db
, @publication = @publication
, @subscriber = @subscriber
, @subscriber_db = @subscriber_db
WAITFOR DELAY '00:00:05' ---- 5 Second Delay
SET @mail = 'Y'
END
END
--SELECT name, current_execution_status FROM ##JobInfo
IF (SELECT current_execution_status FROM ##JobInfo) <> 1 -- if the job is not running start it
BEGIN
EXEC distribution.dbo.sp_MSstartdistribution_agent
@publisher = @publisher
, @publisher_db = @publisher_db
, @publication = @publication
, @subscriber = @subscriber
, @subscriber_db = @subscriber_db
SET @mail = 'Y' -- Send email if job has stopped and needed to be restarted
END
DROP TABLE ##JobInfo
FETCH NEXT FROM cur_sub INTO @publisher, @publisher_db, @publication, @subscriber, @subscriber_db, @subtype, @JobName
END
CLOSE cur_sub
DEALLOCATE cur_subChạy thủ tục do Microsoft cung cấp sp_replmonitorsubscriptionpendingcmds
--system stored procedure to run in distribution database
execute sp_replmonitorsubscriptionpendingcmds
--replication publisher server
@publisher ='PubServer',
--replication publisher database
@publisher_db = 'ProdDBPub',
--replication publication name
@publication ='ProdDBSub',
--replication subscriber server
@subscriber ='SubServer',
--replication subscriber database
@subscriber_db ='ProdDBSub1',
--choose type of subscription you have
@subscription_type ='1' --0 for push and 1 for pull
GOMã bên dưới yêu cầu tùy chọn cấu hình máy chủ Truy vấn phân phối Ad Hoc được bật. Ở đây tôi tạo email để gửi với giả sử Script 3 trước đó đã tìm thấy sự cố sp_replmonitorsubscriptionpendingcmds.
IF @mail = 'Y'
BEGIN
DECLARE @msg VARCHAR(MAX) = 'Replication on ' + @@SERVERNAME
+ ' may be experiencing some problems. Attempts to restart the distribution agent have been made. '
+ 'If this is not the first message like this that you have received within the last hour, please investigate.'
DECLARE @body NVARCHAR(MAX)
DECLARE @xml1 NVARCHAR(MAX)
DECLARE @tab1 NVARCHAR(MAX)
DECLARE @xml2 NVARCHAR(MAX)
DECLARE @tab2 NVARCHAR(MAX)
SET @xml1 = CAST(( SELECT subscriber AS 'td','',subscriber_db AS 'td','',
latency AS 'td','', PendingCmdCount AS 'td','', EstimatedProcessTime AS 'td'
FROM ##SubscriptionInfo s
FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))
SET @tab1 ='<html><body><H4>Subscription Information </H4>
<table border = 1> <tr>
<th> Subscriber </th> <th> Subscriber Database </th> <th> Latency(seconds)</th>
<th> Undistributed Commands </th> <th> Estimated Catch Up Time</th></tr>'
-- this command gives us the last 10 measurements of latency for each subscriber
SET @xml2 = CAST(( SELECT s.Subscriber_db AS 'td','', s.Records_In_Que AS 'td','', s.CatchUpTime AS 'td','', CONVERT(CHAR(22),LogDate, 100) AS 'td'
FROM (SELECT ROW_NUMBER() OVER ( PARTITION BY subscriber_db ORDER BY Logdate DESC ) AS 'RowNumber',
subscriber_db
, Records_In_Que
, CatchUpTime
, Logdate
FROM DBA.dbo.Replication_Que_History
) s
WHERE RowNumber <= 8
FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))
SET @tab2 ='<br><br><H4>Historical Latency Information </H4>
<table border = 1>
<tr>
<th>Subscriber</th> <th>Undistributed Commands</th> <th> Catch Up Time </th> <th> Date\Time </th></tr>'
SET @body = @msg + @tab1 + @xml1 + '</table>'
+ @tab2 + @xml2 + '</body></html>'
DECLARE @to NVARCHAR(200)
SELECT @to = '' -- INSERT YOUR EMAIL ADDRESS HERE
EXEC msdb.dbo.sp_send_dbmail
@body = @body,
@body_format ='HTML',
@recipients = @to,
@subject = 'Possible Replication Problem' ;
END
DROP TABLE #PublisherInfo
DROP TABLE ##PublicationInfo
DROP TABLE ##SubscriptionInfoQuá trình cuối cùng là định kỳ xóa các hàng khỏi bảng trạng thái sao chép để dữ liệu không bị cũ
DECLARE @delDate datetime = getdate()-10
DELETE FROM DBA.dbo.Replication_Que_History
WHERE LogDate < @deldateXin cũng xem xét Tôi cũng lưu ý rằng có một vấn đề với sp numplmonitorubcrippendingcmds nếu bạn vẫn còn với SQL Server 2005 và 2008 Microsoft Connect
Nếu bất kỳ câu trả lời nào ở trên không rõ ràng, bạn có thể theo nguồn tôi đã cung cấp
Cảm ơn!
Bạn có thể nhận thông tin bạn cần bằng cách truy vấn bảng dbo.MSReplication_monitordata từ cơ sở dữ liệu phân phối với tập lệnh này, cho tất cả các ấn phẩm:
USE distribution
SELECT status AS ReplicationAgentsStatus
FROM dbo.MSReplication_monitordata
WHERE publication = 'ALL'Đối với ấn phẩm cụ thể, sửa đổi 'TẤT CẢ' trong câu lệnh WHERE
Ngoài ra, bạn có thể sử dụng tập lệnh powershell này để lọc cột trạng thái từ quy trình lưu trữ hệ thống được lưu trữ hệ thống:
Invoke-Sqlcmd -Query "USE distribution
EXEC sp_replmonitorhelppublication" -ServerInstance "TIKVICKI" | Out-File d:\temp1.txt
Get-Content d:\temp1.txt | where { $_.Contains("status : ") } |
out-file d:\temp2.txt
(Get-Content d:\temp2.txt).replace('status ', 'Replication agents
status') |
Set-Content d:\Replication_Agents_Status_$(get-date -f yyyy-MM-dd-hh-mm-ss).txt
Remove-Item d:\temp1.txt -Force
Remove-Item d:\temp2.txt -ForceTôi thấy kịch bản này trong này bài viết, mà cũng mô tả làm thế nào để thực hiện điều này thông qua giao diện người dùng với một trong hai bên thứ ba công cụ hoặc SSMS.
Có một thủ tục được lưu trữ có thể giúp bạn, nhưng việc cho phép các kết quả của một thủ tục được lưu trữ là rất ít, như bạn có thể biết.
sp_replmonitorhelppublication null