Không thể nâng cấp / cập nhật Ubuntu 18.04 vì lỗi apt / dpkg đang hiển thị

9

Tôi đã sử dụng Ubuntu 18.04 khá lâu rồi và nó vẫn hoạt động tốt cho đến sáng nay khi tôi bật máy tính và sử dụng thiết bị đầu cuối để cập nhật.

Đây là đầu ra của sudo apt upgrade

Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
  libuchardet0 lollypop-portal mpv phantomjs python3-bs4 python3-html5lib
  python3-lxml python3-pylast python3-pyxattr python3-webencodings rtmpdump
  youtube-dl
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
26 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up python3 (3.6.5-3ubuntu1) ...
running python rtupdate hooks for python3.6...
E: py3compile:183: cannot create directory /usr/share/hplip/ui5/__pycache__: FileNotFoundError(2, 'No such file or directory')
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aboutdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aboutdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aligndialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aligndialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/cleandialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/cleandialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/colorcaldialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/colorcaldialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devicesetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devicesetupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/deviceuricombobox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr5.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr5_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr_ext.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabgrouptable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabnametable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabwindow.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabwindow_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/faxsetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/faxsetupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/filetable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/firmwaredialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/firmwaredialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/infodialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/infodialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/linefeedcaldialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/linefeedcaldialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/loadpapergroupbox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/makecopiesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/makecopiesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/mimetypesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/mimetypesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/nodevicesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/nodevicesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindiagnose.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindiagnose_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pluginlicensedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pluginlicensedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pqdiagdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pqdiagdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printernamecombobox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettings_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingsdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingsdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingstoolbox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printtestpagedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printtestpagedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/queuesconf.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/readonlyradiobutton.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/sendfaxdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/sendfaxdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/settingsdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/settingsdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog_base5.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systemtray.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systrayframe.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systrayframe_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/ui_utils.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/upgradedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/upgradedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/wifisetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/wifisetupdialog_base.py'
error running python rtupdate hook hplip-data
dpkg: error processing package python3 (--configure):
 installed python3 package post-installation script subprocess returned error exit status 4
dpkg: dependency problems prevent configuration of update-notifier-common:
 update-notifier-common depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package update-notifier-common (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of idle:
 idle depends on python3 (>= 3.6.5-3ubuntu1); however:
  Package python3 is not configured yet.

dpkg: error processing package idle (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python3-update-manager:
 python3-update-manager depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.

dpkg: error processing package python3-update-manager (--configure):
 dependency problems - leaving unconfigured
No apport report written because the error message indicates its a followup error from a previous failure.
                          No apport report written because the error message indicates its a followup error from a previous failure.
                                                    No apport report written because MaxReports is reached already
                                  dpkg: dependency problems prevent configuration of python3-dev:
 python3-dev depends on python3 (= 3.6.5-3ubuntu1); however:
  Package python3 is not configured yet.

dpkg: error processing package python3-dev (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of gnome-shell:
 gnome-shell depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package gnome-shell (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of netplan.io:
 netplan.io depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package netplan.io (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of nplan:
 nplan depends on netplan.io; however:
  Package netplan.io is not configured yet.

dpkg: error processing package nplan (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of update-notifier:
 update-notifier depends on update-notifier-common (= 3.192.1.3); however:
  Package update-notifier-common is not configured yet.

dpkg: error processing package update-notifier (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of unattended-upgrades:
 unattended-upgrades depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package unattended-upgrades (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of idle3:
 idle3 depends on python3 (>= 3.6.5-3ubuntu1); however:
  Package python3 is not configured yet.
 idle3 depends on idle (>= 3.6.5-3ubuntu1); however:
  Package idle is not configured yet.

dpkg: error processing package idle3 (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of update-manager:
 update-manager depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.
 update-manager depends on update-notifier; however:
  Package update-notifier is not configured yet.
 update-manager depends on policykit-1-gnome | polkit-kde-agent-1 | lxpolkit | lxqt-policykit | mate-polkit | polkit-1-auth-agent; however:
  Package policykit-1-gnome is not installed.
  Package polkit-kde-agent-1 is not installed.
  Package lxpolkit is not installed.
  Package lxqt-policykit is not installed.
  Package mate-polkit is not installed.
  Package polkit-1-auth-agent is not installed.
  Package gnome-shell which provides polkit-1-auth-agent is not configured yet.

dpkg: error processing package update-manager (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gnome-menus:
 gnome-menus depends on python3:any (>= 3.1~); however:
  Package python3 is not configured yet.

dpkg: error processing package gnome-menus (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of update-manager-core:
 update-manager-core depends on python3:any (>= 3.2~); however:
  Package python3 is not configured yet.
 update-manager-core depends on python3-update-manager (= 1:18.04.11.3); however:
  Package python3-update-manager is not configured yet.

dpkg: error processing package update-manager-core (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of gdm3:
 gdm3 depends on gnome-shell (>= 3.19.92); however:
  Package gnome-shell is not configured yet.

dpkg: error processing package gdm3 (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
dpkg: too many errors, stopping
No apport report written because MaxReports is reached already
                                                              Errors were encountered while processing:
 python3
 update-notifier-common
 idle
 python3-update-manager
 python3-dev
 gnome-shell
 netplan.io
 nplan
 update-notifier
 unattended-upgrades
 idle3
 update-manager
 gnome-menus
 update-manager-core
 gconf2
 gdm3
Processing was halted because there were too many errors.
E: Sub-process /usr/bin/dpkg returned an error code (1)

Tôi đã tìm thấy một bài viết khác , nhưng tôi không thể bình luận về điều đó mà không tự đặt câu hỏi vì vậy đây là vấn đề của tôi. sự giúp đỡ sẽ được đánh giá cao. Tôi cũng chạy apt-cache policy hplipnhư được hỏi trong bài khác và nhận được kết quả tương tự.

]hplip:
  Installed: 3.17.10+repack0-5
  Candidate: 3.17.10+repack0-5
  Version table:
 *** 3.17.10+repack0-5 500
        500 http://in.archive.ubuntu.com/ubuntu bionic/main amd64 Packages
        100 /var/lib/dpkg/status
apt  package-management  upgrade  update-manager 
— pennywise666
nguồn
Bạn đã cài đặt HPLIP như thế nào?
— N0rbert
@ N0rbert Tôi đã cài đặt nó từ trang web chính thức của HP tại đây: developers.hp.com/hp-linux-imaging-and-printing/gethplip Thực tế tôi đã cài đặt nó vài ngày trước
— pennywise666 17/07/18
Bạn đã sử dụng hướng dẫn nào? Thông thường các gói phiên bản được đóng gói và nhị phân là trong confliсt. Vì vậy, bạn nên loại bỏ các gói gỡ lỗi hplip trước khi cài đặt phiên bản nhị phân.
— N0rbert
@ N0rbert Tôi đã tải xuống tệp .run từ liên kết Sourceforge mà nó cung cấp Vì vậy, đây là phiên bản nhị phân. Tôi không nghĩ rằng tôi đã cài đặt gói deb trước khi cài đặt phiên bản nhị phân.
— pennywise666
1
Có vẻ như bạn nên loại bỏ hplip-datagói bị hỏng với sudo apt-get purge hplip-data.
— N0rbert

Câu trả lời:

9

Thông thường các phiên bản đóng gói và nhị phân là xung đột. Vì vậy, bạn nên xóa hplipcác gói gỡ lỗi liên quan trước khi cài đặt phiên bản nhị phân.

Vấn đề là trình cài đặt HPLIP. Nó gỡ cài đặt không chính xác phiên bản đóng gói Ubuntu bằng cách xóa các tệp được duy trì bởi trình quản lý gói.

Họ có lưu ý về vấn đề này trên trang hỗ trợ :

Cảnh báo: Nếu bạn đang nâng cấp HPLIP và HPLIP đã được cài đặt sẵn với bản phân phối của bạn hoặc nếu bạn đã cài đặt HPLIP bằng RPM, DEB hoặc gói khác, vui lòng gỡ cài đặt phiên bản trước bằng phương pháp dành riêng cho bản phân phối của bạn. Nếu bạn không làm điều này, bạn có thể có các vấn đề xung đột gói hoặc vấn đề chức năng.

Sẽ an toàn hơn khi cài đặt lại HPLIP nhị phân một lần nữa bằng cách làm theo hướng dẫn trong câu trả lời khác của tôi .

— N0rbert
nguồn
2
Câu trả lời khác của bạn rất hữu ích, vì vậy cảm ơn vì điều đó. Như đã nói, câu trả lời khác nêu phải làm gì khi bắt đầu từ một hệ thống chức năng. Nếu bạn đã "phá vỡ" trình quản lý gói theo câu hỏi này, bạn nên thực hiện các bước nào để kết thúc ở vị trí bạn sẽ làm nếu bạn đã làm theo câu trả lời khác ngay từ đầu?
— Jon Bentley
-1

Đây là vấn đề của trình điều khiển HPLIP. Tải xuống từ https://developers.hp.com/hp-linux-imaging-and-printing . Các lỗi chính nó nói rằng nó đang mong đợi /usr/share/hplip/ui5/*. Vì vậy, vui lòng cài đặt thư viện trong thư mục đó hoặc cài đặt ở nơi khác và di chuyển đến thư mục được chỉ định.

— Hitesh Vaghela
nguồn
Khi sử dụng trang web của chúng tôi, bạn xác nhận rằng bạn đã đọc và hiểu Chính sách cookie và Chính sách bảo mật của chúng tôi.
Licensed under cc by-sa 3.0 with attribution required.