Gần đây tôi đã cập nhật (tốt, borked sau đó cài đặt lại hoàn toàn) đến 12.04.
Tôi đang chạy một thiết lập màn hình kép, với sự kết hợp Dell U2410 / Dell 2007WFP trên HP Elite Book 8560W. Card đồ họa là NVIDIA GF108 [Quadro 1000M].
Vấn đề của tôi là như sau. Tôi có thể thiết lập màn hình kép hoạt động tốt, nhưng mỗi lần khởi động lại, máy của tôi dường như mất các cài đặt (cụ thể, U2410 bị tắt, con trỏ chuột bị khóa trong trình khởi chạy). Tôi phải cài đặt lại các cài đặt sau mỗi lần khởi chạy. Tôi đã thử chạy cài đặt nvidia dưới dạng sudo, tôi đã lưu các thay đổi vào tệp xorg.conf của mình (xem bên dưới) nhưng dường như không có gì bị dính.
Có ai có vấn đề về similair, hoặc biết cách khắc phục? Conf file sau:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "DELL 2007WFP"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro 1000M"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-1"
Option "metamodes" "CRT: 1680x1050 +1920+0, DFP-1: 1920x1200 +0+0; CRT: nvidia-auto-select +0+0, DFP-1: NULL"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Thông báo lỗi tôi nhận được là đây:
none of the selected modes were compatible with the possible modes:
Trying modes for CRTC 642:
CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0)
CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0)
CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0)
CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1)
CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1)
CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1)